CILLITEC UAV-DRONE

CILLITEC UAV-DRONE

martedì 5 novembre 2013

Nine Eagles Galaxy Visitor 2: Quadricottero con camera HD

Nine Eagles Galaxy Visitor 2: Quadricottero con camera HD





 
La Nine Eagles ha presentato il nuovo mini quadricottero per riprese aeree Galaxy Visitor 2. Il quad viene venduto in versione RTF assemblato e pronto al volo, con videocamera in grado di scattare foto e effettuare riprese in HD (1280 x 720 pixel), radiocomando a 4 canali con due comodi bottoni uno per scattare le foto e un’altro per iniziare le riprese video, batteria LiPo da 3.7V 300mAh e SD Card da 2GB.
 

galaxy-visitor-2-multicottero


Dimensioni Nine Eagles Galaxy Visitor 2

Diametro rotore: 56 millimetri
Lunghezza totale: 102 millimetri
Larghezza: 102 millimetri
Altezza: 46 millimetri
Peso: 43g
Trasmettitore: 2,4 GHz 4ch
Batteria: 3.7V 300mAh Li-Po
Motore: motore coreless × 4
Tempo di volo: circa 5,5 minuti (fotocamera unità)

galaxy-visitor-2-multicottero-2

Fonte: Nineeagles

LA TRAX :ALIAS MULTICOPTER...

Alias: nuovo multicopter marchiato LA TRAX



latrax-alias-quad
LaTrax il nuovo brand presentato questa estate dalla Traxxas ha annunciato l’uscita del multicottero Alias con sistema autolivellante a 6 assi. Il LaTrax Alias viene fornito in versione RTF pronto al volo con radiocomando con schermo LCD, una batteria Li-Po da 3.7V 650mAh 20C e caricatore con alimentazione USB. Fra le caratteristiche principali troviamo tre modalità di volo, un sistema di LED luminosi e di telemetria per tenere sotto controllo la carica della batteria che offre un tempo di volo di circa 15 minuti.



Caratteristiche multicottero RTF LaTrax Alias

Sistema di volo autolivellante a 6 assi
Sistema di led luminosi
Sistema radio 2,4 GHz
Struttura in materiale composito
Rapporto di trasmissione: 11:78
Batteria LiPo 3.7V 650mAh 20C
Caricabatterie con alimentazione USB
Tempo di volo: 15 minuti
Motori: brushed Coreless
Un set pale del rotore di ricambio
6608-bottom-view-green-rgb
6608-drivetrain
6639-transmitter

Dimensioni

Dimensioni pale: 375,30 millimetri
Larghezza: 306,50 millimetri
Altezza: 42,90 millimetri
Altezza dal suolo: 11,90 millimetri
Peso in volo (con batteria): 100 grammi

FONTE:LaTrax Alias: nuovo multicottero RTF della TRAXXAS

domenica 3 novembre 2013

Gimball: An insect-like, crash-happy flying robot

A MIO PARERE IL MIGLIORE PER ESSERE USATO IN ZONE IMPERVIE O TERREMOTATE....!!!

newball

A very clever take on the Japanese sphere of a couple of years ago from . Mounting the control surfaces and power on a free hanging internal gimble gets rid of all sorts of problems. It made me declare of course! As with so many things less can be more!







Gimball: An insect-like, crash-happy flying robot

Gimball bumps into and ricochets off of obstacles, rather than avoiding them. This 34 centimeter in diameter spherical flying robot buzzes around the most unpredictable, chaotic environments, without the need for fragile detection sensors. This resiliency to injury, inspired by insects, is what sets it apart from other flying robots. Gimball is protected by a spherical, elastic cage which enables it to absorb and rebound from shocks. It keeps its balance using a gyroscopic stabilization system. When tested in the forests above Lausanne, Switzerland, it performed brilliantly, careening from tree trunk to tree trunk but staying on course. It will be presented in public at the IREX conference in Tokyo, Japan from November 5-9, 2013.




Powered by twin propellers and steered by fins, Gimball can stay on course despite its numerous collisions. This feat was a formidable challenge for EPFL PhD student Adrien Briod. “The idea was for the robot’s body to stay balanced after a collision, so that it can keep to its trajectory,” he explains. “Its predecessors, which weren’t stabilized, tended to take off in random directions after impact.” With colleague Przemyslaw Mariusz Kornatowski, Briod developed the gyroscopic stabilization system consisting of a double carbon-fiber ring that keeps the robot oriented vertically, while the cage absorbs shocks as it rotates.



Going sensor-free: insect-inspired design

Most robots navigate using a complex network of sensors, which allow them to avoid obstacles by reconstructing the environment around them. It’s an inconvenient method, says Briod. “The sensors are heavy and fragile. And they can’t operate in certain conditions, for example if the environment is full of smoke.”



Gimball’s robustness lies in its technological simplicity, says Briod. “Flying insects handle collisions quite well. For them, shocks aren’t really accidents, because they’re designed to bounce back from them. This is the direction we decided to take in our research.”



Navigating chaotic environments

The flying robot is prepared to deal with the most difficult terrain out there. “Our objective was exactly that – to be able to operate where other robots can’t go, such as a building that has collapsed in an earthquake. The on-board camera can provide valuable information to emergency personnel.” The scientist had an opportunity to test his prototype in a Swiss pine forest. Fitted out with just a compass and an altitude sensor, Gimball demonstrated its ability to maintain its course over several hundred meters despite colliding with several tree trunks along the way.



Gimball is the latest in a long line of colliding robots developed in the laboratory of EPFL professor Dario Floreano. But its stabilization system, spherical shape and ultralight weight – barely 370 grams – demonstrate the potential of the concept better than ever before. “The mechanics must also be intelligent, since complex obstacle avoidance systems are not sufficient,” says Briod. Even so, he insists, “we’re not yet ready to compete with our model. Insects are still superior.



My own not as clever attempt at a ball a couple of years ago.





It would be quite simple to recreate the flying part of this platform, the outer gimball, not so much.




The KK2 board has firmware for VTOLs and Hobbyking also sell a suitable duel motor setup



That’s enough clues. The contra rotating props will sort out the yaw, you can clearly see how the original handled it in this video.







fonnte:Gimball: An insect-like, crash-happy flying robot | sUAS News

Northrop Grumman-built MQ-8C Fire Scout First Flight | sUAS News

Northrop Grumman-built MQ-8C Fire Scout First Flight


firescoutflight

The Northrop Grumman-built MQ-8C Fire Scout unmanned helicopter successfully completed its first flight on Oct. 31 from Naval Base Ventura County Point Mugu, Calif. Northrop Grumman is the prime contractor for the U.S. Navy’s Fire Scout program that includes the combat-proven MQ-8B and the next-generation MQ-8C variant. The MQ-8C provides the Navy with increased endurance, range, and payload capacity.






FONTE:Northrop Grumman-built MQ-8C Fire Scout First Flight | sUAS News

CLIF JUMPERS: mozzafiato meraviglioso per chi ama l'estremo

These guys have always made great videos, and now they're even better with footage from the air.  Name that copter at 3:07...








FONTE:Awesome aerial footage of cliff jumpers - DIY Drones

sabato 2 novembre 2013

Crowdfund A Collapsible RC Tricopter

Crowdfund A Collapsible RC Tricopter





It looks a bit like Anakin Skywalker's starfighter from The Phantom Menace.

By Kelsey D. Atherton Posted 11.01.2013 at 3:27 pm  
The three-rotor SwitchBlade, a small, collapsible drone that's already raised $32,810 on Kickstarter, is designed to compete with radially symmetric quadrotors in the realms of search and rescue, infrastructure inspection, aerial photography, research, and (of course) recreational flight. According to creators Vision Aerial, the tricopter has better balance while flying forward compared with a quadcopter; it's also easier to determine the orientation of an asymmetrical drone while in flight.


The SwitchBlade comes in both regular and pro models. Neither include cameras or other special sensors right out of the box, but both have mounts for them. Both have on-board flight computers that keep the trirotor stable in the air; the pro's system allows for programmable missions. Radio controllers are included with each model. The regular SwitchBlade goes for $949 on Kickstarter, while the pro costs $1,549.

After years of quadrotor domination in the commercial drone market, we're excited to see new designs emerge. Watch some SwitchBlade-captured aerial views of a motocross track below.







taken from :http://www.popsci.com/article/technology/crowdfund-collapsible-rc-t...